30 min delay for mail.sh

calvados.sh

@@ -1,3 +1,94 @@
 #!/usr/bin/eval bash
 
-# nothing to do
+PROTON_TARGET="/Users/hb/mnt/nas/backups/div"
+PROTON_TARGET_FILE="proton_mail_pass.$EXT"
+PROTON_ROOT="/Users/hb/Downloads"
+PROTON_BACKUP_DIR="Proton_Backup"
+PROTON_BACKUP="$PROTON_ROOT/$PROTON_BACKUP_DIR"
+PROTON_MAIL_EXPORT="$PROTON_ROOT/proton-mail-export-cli"
+PROTON_PASS_EXPORT="$PROTON_ROOT/Proton Pass_export"
+
+check_proton() {
+    if [ ! -d "$PROTON_MAIL_EXPORT" ]; then
+        mail_log $ERROR "$ERR there is no Proton Mail export."
+        return 1
+    fi
+    # tr ist nötig, weil bei macOS führene blanks entfernt werden müssen
+    if [ "$(ls "$PROTON_PASS_EXPORT"*|wc -l|tr -d ' ')" != "1" ]; then
+        mail_log $ERROR "$ERR there is no Proton Pass export."
+        return 1
+    fi
+    if [ ! -d "$PROTON_TARGET" ]; then
+        mail_log $ERROR "$ERR could not find targe dir $PROTON_TARGET!"
+        return 1
+    fi
+    if [ -f "$PROTON_TARGET/$PROTON_TARGET_FILE" ]; then
+        log $DEBUG "$DBG > rm -f \"$PROTON_TARGET/$PROTON_TARGET_FILE\""
+        rm -f "$PROTON_TARGET/$PROTON_TARGET_FILE" >>$LOG_FILE 2>&1
+    fi
+}
+
+delete_proton_backup_dir() {
+    log $DEBUG "$DBG delete_proton_backup_dir()"
+    if [ -d "$PROTON_BACKUP" ]; then
+        log $DEBUG "$DBG > rm -rf \"$PROTON_BACKUP\""
+        rm -rf "$PROTON_BACKUP" >>$LOG_FILE 2>&1 && return 0
+    fi
+    return 1
+}
+
+create_proton_backup_dir() {
+    log $DEBUG "$DBG create_proton_backup_dir()"
+    delete_proton_backup_dir
+
+    log $DEBUG "$DBG > mkdir -p \"$PROTON_BACKUP\""
+    mkdir -p "$PROTON_BACKUP" >>$LOG_FILE 2>&1 && return 0
+    return 1
+}
+
+move_proton_exports() {
+    log $DEBUG "$DBG move_proton_exports()"
+
+    log $DEBUG "$DBG > mv \"$PROTON_MAIL_EXPORT\" \"$PROTON_BACKUP\""
+    mv "$PROTON_MAIL_EXPORT" "$PROTON_BACKUP" >>$LOG_FILE 2>&1
+    if [ $? -ne 0 ]; then return 1; fi
+
+    log $DEBUG "$DBG > mv \"$PROTON_PASS_EXPORT\"* \"$PROTON_BACKUP\""
+    mv "$PROTON_PASS_EXPORT"* "$PROTON_BACKUP" >>$LOG_FILE 2>&1
+    if [ $? -ne 0 ]; then return 1; fi
+}
+
+do_proton_backup() {
+    log $DEBUG "$DBG do_proton_backup()"
+
+    mail_log $INFO "$INF checking environment"
+    check_proton
+    is_error $? && return 1
+
+    mail_log $INFO "$INF create $PROTON_BACKUP"
+    create_proton_backup_dir
+    is_error $? && return 1
+
+    mail_log $INFO "$INF move Proton exports to source directory"
+    move_proton_exports
+    is_error $? && return 1
+
+    mail_log $INFO "$INF backing up Proton exports to $PROTON_TARGET/$PROTON_TARGET_FILE"
+    backup_directory "$PROTON_ROOT" "$PROTON_TARGET/$PROTON_TARGET_FILE" "$PROTON_BACKUP_DIR"
+    is_error $? && return 1
+}
+
+proton_backup() {
+    mail_log $INFO ">>>>>>>>>> Proton backup $VER at $HOST_NAME <<<<<<<<<<"
+    do_proton_backup
+
+    mail_log $INFO "$INF deleting $PROTON_BACKUP"
+    delete_proton_backup_dir
+    is_error $?
+    
+    mail_log $DEBUG "$DBG rm -f \"$PROTON_PASS_EXPORT\"*"
+    mail_log $DEBUG "$(rm -f "$PROTON_PASS_EXPORT"* 2>&1)"
+
+    mail_log $INFO ">>>>>>>>>> end of Proton backup"
+    send_mail_log "Proton Backup"   
+}

mail.sh

@@ -46,13 +46,22 @@ if [ -z "$TO" ] || [ -z "$SUBJECT" ]; then
     exit
 fi
 
+PODMANCMD="$SUDO $PODMAN"
+if [ ! -z "$REMOTE" ]; then
+    PODMANCMD="ssh $MAILSERVER_IP $PODMANCMD"
+fi
+
+# der Mail-Container sollte laufen, falls nicht, dann ist wahrscheinlich der Backup
+# noch nicht durch => 30 Minuten warten
+$PODMANCMD ps | grep $MAILCONTAINER >/dev/null
+if [ $? -ne 0 ]; then
+    sleep 30m
+fi
+
 # Mail body aus Datei oder STDIN holen
 CONTENT=$(cat ${1:--})
 
-MAILCMD="$SUDO $PODMAN exec -i $MAILCONTAINER /usr/sbin/sendmail -i -t"
+MAILCMD="$PODMANCMD exec -i $MAILCONTAINER /usr/sbin/sendmail -i -t"
-if [ ! -z "$REMOTE" ]; then
-    MAILCMD="ssh $MAILSERVER_IP $MAILCMD"
-fi
 # construct mail header + content and pipe to sendmail
 cat <<EOMB | $MAILCMD
 FROM: hb42@gmx.de

main.inc.sh

@@ -31,6 +31,9 @@ CONTAINER_EXEC_USER=" $PODMAN exec"
 CONTAINER_SVC_UPDATE_USER=" $PODMAN auto-update"
 CONTAINER_EXEC="podman exec"
 
+tagP1=".backup#"
+tagP2=".tag"
+
 LOG_RECIPIENT=hb242@pm.me
 INFO=INFO
 WARN=WARN
@@ -149,6 +152,17 @@ check_root() {
         exit 100
     fi
 }
+# Ausführung auf macOS begrenzen
+#
+check_mac() {
+    if [[ "$(uname)" != "Darwin" ]]; then
+        log $ERROR "$ERR script works only on MAC."
+        echo "****"
+        echo "***** script works only on MAC! *****"
+        echo "****"
+        exit 110
+    fi
+}
 
 start_containers() {
     local let rc=0 
@@ -161,6 +175,8 @@ start_containers() {
     if [ -d /var/containers ]; then
         do_start_stop_containers start
         let rc=rc+$?
+         # warten bis alle wieder da sind
+        sleep 2m
     fi
     return $rc
 }
@@ -205,22 +221,22 @@ do_start_stop_containers() {
 update_services() {
     log $DEBUG "$DBG update_services()"
     mail_log $INFO "$INF    update services"
-    local old_img=$($PODMAN ps --format "table {{.ImageID}} {{.Names}} {{.Image}}" --sort names)
+    local old_img=$($PODMAN ps --filter "label=io.containers.autoupdate=registry" --format "table {{.ImageID}} {{.Names}} {{.Image}}" --sort names)
     echo "$old_img" >>$LOG_FILE 2>&1
     local plan=$($CONTAINER_SVC_UPDATE_USER --dry-run --format "{{.Image}} {{.Updated}}" 2>&1 | grep pending | sed 's/^\(.*\) pending/\1/')
-    local upd=$($CONTAINER_SVC_UPDATE_USER --format "table {{.Image}} {{.Updated}}" 2>&1 | tee -a $LOG_FILE | grep true | sed 's/^\(.*\) true/\1/')
-    check_pipe_rc ${PIPESTATUS[@]}
-    local rc=$?
-    # warten bis alle wieder da sind (wg. ps)
-    sleep 20 
-    local new_img=$($PODMAN ps --format "table {{.ImageID}} {{.Names}} {{.Image}}" --sort names)
-    echo "$new_img" >>$LOG_FILE 2>&1
     for i in $plan; do
         mail_log $INFO "$INF      pending: $i"
     done
+    local upd=$($CONTAINER_SVC_UPDATE_USER --format "table {{.Image}} {{.Updated}}" 2>&1 | tee -a $LOG_FILE | grep true | sed 's/^\(.*\) true/\1/')
+    check_pipe_rc ${PIPESTATUS[@]}
+    local rc=$?
     for i in $upd; do
         mail_log $INFO "$INF      updated: $i"
     done
+    # warten bis alle wieder da sind (wg. ps)
+    sleep 2m >>$LOG_FILE 2>&1
+    local new_img=$($PODMAN ps --filter "label=io.containers.autoupdate=registry" --format "table {{.ImageID}} {{.Names}} {{.Image}}" --sort names)
+    echo "$new_img" >>$LOG_FILE 2>&1
     # diff output bring zu wenig
     #log $DEBUG "$DBG diff before after"
     #local diff_img=$(diff <(echo "$old_img") <(echo "$new_img"))
@@ -429,7 +445,29 @@ backup_all_dirs() {
     for dir in $(iterate_dirs_in "$root" "$@"); do
         tar_file="$target/$prefix-$dir.$EXT"
 
-        backup_dir "$root" "$tar_file" "$dir"
+        backup_directory "$root" "$tar_file" "$dir"
+        if [ $? -ne 0 ]; then return 1; fi
+
+    done
+    return 0
+}
+
+# Einzelnes Verzeichnis sichern und Backup prüfen
+#
+# $1 - Pfad zum Verzeichnis, das gesichert werden soll
+# $2 - Zielpfad und -name für das Archiv
+# $2 - zu sicherndes Verzeichnis
+#
+# returns 0 for success, 1 otherwise
+#
+
+backup_directory() {
+    log $DEBUG "$DBG backup_directory( $@ )"
+    local root=$1
+    local tar_file=$2
+    local dir=$3
+        
+    tar_dir "$root" "$tar_file" "$dir"
     if [ $? -ne 0 ]; then return 1; fi
 
     create_list "$tar_file" "$dir"
@@ -437,25 +475,28 @@ backup_all_dirs() {
 
     test_integrity "$tar_file"
     if [ $? -ne 0 ]; then return 1; fi
-    done
+
-    return 0
 }
 
 # Einzelnes Verzeichnis sichern.
 #
-# $1 - Pfad um Verzeichnis, das gesichert werden soll
+# $1 - Pfad zum Verzeichnis, das gesichert werden soll
 # $2 - Zielpfad und -name für das Archiv
 # $2 - zu sicherndes Verzeichnis
 #
 # returns 0 for success, 1 otherwise
 #
-backup_dir() {
+tar_dir() {
-    log $DEBUG "$DBG backup_dir( $@ )"
+    log $DEBUG "$DBG tar_dir( $@ )"
     local root=$1
     local archive=$2
     local dir=$3
-    log $DEBUG "$DBG > tar -c -z --numeric-owner --one-file-system --sort=name --exclude \"@eaDir\" -C \"$root\" \"$dir\" | gpg --batch -c --passphrase xxxx -o \"$archive\""
+    local sort=--sort=name
-    tar -c -z --numeric-owner --one-file-system --sort=name --exclude "@eaDir" -C "$root" "$dir" 2>>$LOG_FILE  | gpg --batch -c --passphrase $PASSPHRASE -o "$archive" 2>>$LOG_FILE 
+    if [[ "$(uname)" == "Darwin" ]]; then
+        sort=""
+    fi
+    log $DEBUG "$DBG > tar -c -z --numeric-owner --one-file-system $sort --exclude \"@eaDir\" -C \"$root\" \"$dir\" | gpg --batch -c --passphrase xxxx -o \"$archive\""
+    tar -c -z --numeric-owner --one-file-system $sort --exclude "@eaDir" -C "$root" "$dir" 2>>$LOG_FILE  | gpg --batch -c --passphrase $PASSPHRASE -o "$archive" 2>>$LOG_FILE 
     check_pipe_rc ${PIPESTATUS[@]}
     return $?
 }
@@ -757,8 +798,8 @@ mount_usb_device() {
     fi
 }
 
-# Check if auto mounted device is exfat and return mount point
+# Check if auto mounted device is exfat or vfat and return mount point
-# (fn for consitence with linux fn)
+# (fn for consistence with linux fn)
 #
 # $1 - device name
 # returns mount point
@@ -768,7 +809,7 @@ mount_usb_device_syno() {
     local device=$1
     log $DEBUG "$DBG > $SYNO_USB -info $device | grep -i \"file system\" | sed -E \"s/.*:\s*(.*)\s*/\1/\""
     local fs=$($SYNO_USB -info $device 2>>$LOG_FILE | grep -i "file system" 2>>$LOG_FILE | sed -E "s/.*:\s*(.*)\s*/\1/" 2>>$LOG_FILE)
-    if [ "$fs" != "exfat" ]; then
+    if [ "$fs" != "exfat" && "$fs" != "vfat" ]; then
         mail_log $ERROR "$ERR device $device not exfat formatted."
         return 1
     fi
@@ -779,6 +820,7 @@ mount_usb_device_syno() {
         mail_log $ERROR "$ERR mount point \"$mount_point\" does not exist."
         return 1
     fi
+    mount_point=$(check_syno_mount_point $mount_point)
     echo $mount_point
     return 0
 }
@@ -843,6 +885,28 @@ umount_usb_device_linux() {
     return $?
 }
 
+# Mit GUID-Partitontable meldet Synology die falsche Partition (/volumeUSB1/usbshare1-1)
+# zusätzlich auf ggf. vorhandener 2. Partition (*1-2) suchen
+#
+# $1 - mount point
+#
+check_syno_mount_point() {
+    log $DEBUG "$DBG check_syno_mount_point( $@ )"
+    local mount_point=$1
+
+    log $DEBUG "$DBG > ls $mount_point/${tagP1}*${tagP2} | wc -l"
+    if [ "$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | wc -l 2>>$LOG_FILE)" != "1" ]; then
+        
+        log $DEBUG "No tag at mount point \"$mount_point\". Checking next partiton."
+        mount_point=$(echo $mount_point | sed -E "s/(.*1)-1/\1-2/")
+        if [ "$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | wc -l 2>>$LOG_FILE)" != "1" ]; then
+            mail_log $ERROR "$ERR no tag found on device at $mount_point."
+            return 1
+        fi
+    fi
+    echo $mount_point
+}   
+
 # USB-HDD suchen und Backup-Typ ermitteln
 #
 # Der Typ wird über eine Datei auf der USB-HDD festgelegt:
@@ -853,19 +917,11 @@ umount_usb_device_linux() {
 check_backup_device() {
     log $DEBUG "$DBG check_backup_drive( $@ )"
     local mount_point=$1
-    local tagP1=".backup#"
-    local tagP2=".tag"
-
-    log $DEBUG "$DBG > ls $mount_point/${tagP1}*${tagP2} | wc -l"
-    if [ "$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | wc -l 2>>$LOG_FILE)" != "1" ]; then
-        mail_log $ERROR "$ERR no tag found on device at $mount_point."
-        return 1
-    fi
 
     log $DEBUG "$DBG > ls $mount_point/${tagP1}*${tagP2} | sed -E \"s/.*$tagP1(.*)$tagP2/\1/\""
     local tag=$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | sed -E "s/.*$tagP1(.*)$tagP2/\1/" 2>>$LOG_FILE)
     if [ $? -ne 0 ]; then
-        mail_log $ERROR "$ERR no tag found on device at $mount_point."
+        mail_log $ERROR "$ERR no valid tag found on device at $mount_point."
         return 1
     fi
     echo $tag

main.sh

@@ -3,6 +3,13 @@
 # entrypoint for all actions
 #
 
+# 2.3.1.  16.08.2025 - 30 min delay for mail.sh
+# 2.3.0   12.08.2025 - new function for backup & encryption of Proton exports
+# 2.2.4   30.07.2025 - inc delay (again) for container startup-check (2m)
+# 2.2.3   24.06.2025 - Export-Disk kann exfat- oder vfat-formatiert sein, 
+#                      Export-Disk mit mehreren Partitonen erkennen
+# 2.2.2   19.06.2025 - inc delay for container startup check, fix error in log output
+# 2.2.1   16.06.2025 - delay container startup check
 # 2.2.0   16.05.2025 - fixes for auto-update, podman migration done
 # 2.1.17  11.05.2025 - bugfixes, sort tar archive, split daily/cron daily
 # 2.1.16  10.05.2025 - fix mail.sh, log results of auto-update
@@ -17,7 +24,7 @@
 # 2.1.7   29.04.2025 - 1. Schritt zur Umstellung auf podman
 # 2.1.6   29.04.2025 - weekly backup Sa->SO
 
-VER="2.2.0"
+VER="2.3.1"
 
 HERE=$(dirname "$0")
 THIS_SCRIPT=$0
@@ -33,6 +40,7 @@ show_help() {
     echo "                       show contents of archive (path from $NAS_ROOT)"
     echo '       -r, --restore <archive> <file(s)> ' 
     echo "                       restore files from archive to $RESTORE_PATH"
+    echo "       -p, --proton    backup and encrypt Proton exports (MacBook only)"
     echo "       -h, -?. --help  show this help"
     echo " "
     echo " -d, -w, -e must be run as superuser."
@@ -128,6 +136,12 @@ while :; do
             do_restore $@
             break
             ;;
+        -p|--proton)
+            MAIL_LOG_FILE="${log_file_name}.proton.log"
+            check_mac
+            proton_backup
+            break
+            ;;
         --)              # End of all options.
             shift
             break