30 min delay for mail.sh

calvados.sh

@@ -1,3 +1,94 @@
 #!/usr/bin/eval bash
 
-# nothing to do
+PROTON_TARGET="/Users/hb/mnt/nas/backups/div"
+PROTON_TARGET_FILE="proton_mail_pass.$EXT"
+PROTON_ROOT="/Users/hb/Downloads"
+PROTON_BACKUP_DIR="Proton_Backup"
+PROTON_BACKUP="$PROTON_ROOT/$PROTON_BACKUP_DIR"
+PROTON_MAIL_EXPORT="$PROTON_ROOT/proton-mail-export-cli"
+PROTON_PASS_EXPORT="$PROTON_ROOT/Proton Pass_export"
+
+check_proton() {
+    if [ ! -d "$PROTON_MAIL_EXPORT" ]; then
+        mail_log $ERROR "$ERR there is no Proton Mail export."
+        return 1
+    fi
+    # tr ist nötig, weil bei macOS führene blanks entfernt werden müssen
+    if [ "$(ls "$PROTON_PASS_EXPORT"*|wc -l|tr -d ' ')" != "1" ]; then
+        mail_log $ERROR "$ERR there is no Proton Pass export."
+        return 1
+    fi
+    if [ ! -d "$PROTON_TARGET" ]; then
+        mail_log $ERROR "$ERR could not find targe dir $PROTON_TARGET!"
+        return 1
+    fi
+    if [ -f "$PROTON_TARGET/$PROTON_TARGET_FILE" ]; then
+        log $DEBUG "$DBG > rm -f \"$PROTON_TARGET/$PROTON_TARGET_FILE\""
+        rm -f "$PROTON_TARGET/$PROTON_TARGET_FILE" >>$LOG_FILE 2>&1
+    fi
+}
+
+delete_proton_backup_dir() {
+    log $DEBUG "$DBG delete_proton_backup_dir()"
+    if [ -d "$PROTON_BACKUP" ]; then
+        log $DEBUG "$DBG > rm -rf \"$PROTON_BACKUP\""
+        rm -rf "$PROTON_BACKUP" >>$LOG_FILE 2>&1 && return 0
+    fi
+    return 1
+}
+
+create_proton_backup_dir() {
+    log $DEBUG "$DBG create_proton_backup_dir()"
+    delete_proton_backup_dir
+
+    log $DEBUG "$DBG > mkdir -p \"$PROTON_BACKUP\""
+    mkdir -p "$PROTON_BACKUP" >>$LOG_FILE 2>&1 && return 0
+    return 1
+}
+
+move_proton_exports() {
+    log $DEBUG "$DBG move_proton_exports()"
+
+    log $DEBUG "$DBG > mv \"$PROTON_MAIL_EXPORT\" \"$PROTON_BACKUP\""
+    mv "$PROTON_MAIL_EXPORT" "$PROTON_BACKUP" >>$LOG_FILE 2>&1
+    if [ $? -ne 0 ]; then return 1; fi
+
+    log $DEBUG "$DBG > mv \"$PROTON_PASS_EXPORT\"* \"$PROTON_BACKUP\""
+    mv "$PROTON_PASS_EXPORT"* "$PROTON_BACKUP" >>$LOG_FILE 2>&1
+    if [ $? -ne 0 ]; then return 1; fi
+}
+
+do_proton_backup() {
+    log $DEBUG "$DBG do_proton_backup()"
+
+    mail_log $INFO "$INF checking environment"
+    check_proton
+    is_error $? && return 1
+
+    mail_log $INFO "$INF create $PROTON_BACKUP"
+    create_proton_backup_dir
+    is_error $? && return 1
+
+    mail_log $INFO "$INF move Proton exports to source directory"
+    move_proton_exports
+    is_error $? && return 1
+
+    mail_log $INFO "$INF backing up Proton exports to $PROTON_TARGET/$PROTON_TARGET_FILE"
+    backup_directory "$PROTON_ROOT" "$PROTON_TARGET/$PROTON_TARGET_FILE" "$PROTON_BACKUP_DIR"
+    is_error $? && return 1
+}
+
+proton_backup() {
+    mail_log $INFO ">>>>>>>>>> Proton backup $VER at $HOST_NAME <<<<<<<<<<"
+    do_proton_backup
+
+    mail_log $INFO "$INF deleting $PROTON_BACKUP"
+    delete_proton_backup_dir
+    is_error $?
+    
+    mail_log $DEBUG "$DBG rm -f \"$PROTON_PASS_EXPORT\"*"
+    mail_log $DEBUG "$(rm -f "$PROTON_PASS_EXPORT"* 2>&1)"
+
+    mail_log $INFO ">>>>>>>>>> end of Proton backup"
+    send_mail_log "Proton Backup"   
+}

check.sh

@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# check if container services are running
+
+UNITS="/var/containers/systemd"
+FAILED=""
+
+check_service() {
+    local service=$1
+
+    systemctl is-active --user --machine=container@ $service >/dev/null
+    if [ $? -ne 0 ]; then
+        FAILED="$FAILED $service"
+    fi
+}
+
+check() {
+    local type=$1
+    for i in $UNITS/$type/*.socket; do
+        check_service $(basename $i)
+    done
+
+    for i in $UNITS/$type/*.container; do
+        check_service $(basename $i .container).service 
+    done
+}
+
+check user
+check system
+
+if [ -z "$FAILED" ]; then
+    echo "OK  All services are running"
+    exit 0
+else
+    echo "#" >&2
+    echo "# ERROR  some services are not running:" >&2
+    echo "#" >&2
+    echo "#       $FAILED" >&2
+    echo "#" >&2
+    exit 1
+fi

cron.sh

@@ -3,4 +3,4 @@
 HERE=$(dirname "$0")
 
 # local start
-sudo sh -c "nohup $HERE/main.sh -d  </dev/null &"
+sudo sh -c "nohup $HERE/main.sh --dx  </dev/null &"

hamiller.sh

@@ -3,15 +3,15 @@
 USER_CONTAINERS=
 ROOT_CONTAINERS="pihole"
 
-BACKUP_TARGET=/var/docker/tmp
+BACKUP_TARGET=/var/containers/tmp
 NAS_TARGET="$NAS_ROOT/daily/$HOST_NAME/backup.$DAY"
 
 backup_daily1() {
     BACKUP_SOURCE="/var"
-    BACKUP_EXCLUDE_DIRS=(docker)
+    BACKUP_EXCLUDE_DIRS=(containers)
 }
 backup_daily2() {
-    BACKUP_SOURCE="/var/docker"
+    BACKUP_SOURCE="/var/containers"
     BACKUP_EXCLUDE_DIRS=(tmp)
 }
 
@@ -27,5 +27,7 @@ after_backup() {
     let rc=rc+$?
     copy_to_nas "$BACKUP_TARGET" "$NAS_TARGET"
     let rc=rc+$?
+    #check_services
+    #let rc=rc+$?
     return $rc
 }

mail.sh

@@ -1,5 +1,5 @@
 #!/usr/bin/env bash
-# Mail via GMX-Relay versenden (Docker-Image "hb42/smtp")
+# Mail via GMX-Relay versenden (Podman-Image "smtp-relay")
 #
 # Klappt nur direkt im Container, daher ggf. via ssh aufrufen (Annahme: remote user == local user)
 #
@@ -12,10 +12,15 @@
 # > mail.sh hb242@pm.me "log whatever" ../log/some.log
 #
 
-DOCKER=/usr/bin/docker
+PODMAN=/usr/bin/podman
-MAILCONTAINER=smtp
+#
+# -i ist entscheident, damit die restliche Kommandozeile sauber ausgewertet wird
+#    das ersetzt den expliziten Aufruf mit "sh -c "..." "
+SUDO="sudo -u container -i"
+MAILCONTAINER=smtp-relay
 MAILSERVER_IP=10.4.2.30
-SSH=""
+REMOTE=""
+
 
 which ip >/dev/null 2>&1
 if [ $? -eq 0 ]; then
@@ -27,7 +32,7 @@ else
 fi
 
 if [ "$myip" != "$MAILSERVER_IP" ]; then
-    SSH="ssh $MAILSERVER_IP"
+    REMOTE=yes
 fi
 
 TO=$1
@@ -41,11 +46,24 @@ if [ -z "$TO" ] || [ -z "$SUBJECT" ]; then
     exit
 fi
 
+PODMANCMD="$SUDO $PODMAN"
+if [ ! -z "$REMOTE" ]; then
+    PODMANCMD="ssh $MAILSERVER_IP $PODMANCMD"
+fi
+
+# der Mail-Container sollte laufen, falls nicht, dann ist wahrscheinlich der Backup
+# noch nicht durch => 30 Minuten warten
+$PODMANCMD ps | grep $MAILCONTAINER >/dev/null
+if [ $? -ne 0 ]; then
+    sleep 30m
+fi
+
 # Mail body aus Datei oder STDIN holen
 CONTENT=$(cat ${1:--})
 
+MAILCMD="$PODMANCMD exec -i $MAILCONTAINER /usr/sbin/sendmail -i -t"
 # construct mail header + content and pipe to sendmail
-cat <<EOMB | $SSH $DOCKER exec -i $MAILCONTAINER /usr/sbin/sendmail -i -t
+cat <<EOMB | $MAILCMD
 FROM: hb42@gmx.de
 TO: ${TO}
 DATE: $(date -R)

main.inc.sh

@@ -12,7 +12,7 @@ LOG_KEEP_DAYS=14
 
 RESTORE_PATH="$NAS_MOUNT_POINT/Server/restore"
 
-BACKUP_MASTER_CHECK="/var/docker/vol/proxy"
+BACKUP_MASTER_CHECK="/var/containers/vol/caddy"
 
 NAS_HOSTNAME=synology
 NAS_IP=10.4.2.20
@@ -22,13 +22,18 @@ PASSPHRASE=L1rfCXu8PHMQsGL0HJWwzQYpCT7f5VboislOTHMaEV
 EXT=tgz.gpg
 LIST_EXT=list
 
-DOCKER="/usr/bin/docker compose -f /var/docker/run/docker-compose.yml --ansi never"
+#DOCKER="/usr/bin/docker compose -f /var/docker/run/docker-compose.yml --ansi never"
 SYNO_USB=/usr/syno/bin/synousbdisk
 SYSTEMCTL_USER="/usr/bin/systemctl --user --machine=container@"
 SYSTEMCTL="/usr/bin/systemctl"
-CONTAINER_EXEC_USER=" sudo -u container podman exec"
+PODMAN=" sudo -u container -i podman"
+CONTAINER_EXEC_USER=" $PODMAN exec"
+CONTAINER_SVC_UPDATE_USER=" $PODMAN auto-update"
 CONTAINER_EXEC="podman exec"
 
+tagP1=".backup#"
+tagP2=".tag"
+
 LOG_RECIPIENT=hb242@pm.me
 INFO=INFO
 WARN=WARN
@@ -98,20 +103,20 @@ prune_logs() {
 
 # ----- db dump -----
 
-dump_mariadb() {
+#dump_mariadb() {
-    return 0
+#    return 0
-    log $DEBUG "$DBG dump_mariadb( $@ )"
+#    log $DEBUG "$DBG dump_mariadb( $@ )"
-    local dump_dir=$1
+#    local dump_dir=$1
-    local mysqlconnect="--user=root --password=snafu"
+#    local mysqlconnect="--user=root --password=snafu"
-
+#
-    log $DEBUG "$DBG > \$DOCKER exec mysql /usr/bin/mariadb --silent --user=xxx --password=xxx -e \"show databases\" -B"
+#    log $DEBUG "$DBG > \$DOCKER exec mysql /usr/bin/mariadb --silent --user=xxx --password=xxx -e \"show databases\" -B"
-    for db in $($DOCKER exec mysql /usr/bin/mariadb --silent $mysqlconnect -e "show databases" -B 2>>$LOG_FILE | grep -v information_schema 2>>$LOG_FILE | grep -v performance_schema 2>>$LOG_FILE | sed -e 's/\r//' 2>>$LOG_FILE); do
+#    for db in $($DOCKER exec mysql /usr/bin/mariadb --silent $mysqlconnect -e "show databases" -B 2>>$LOG_FILE | grep -v information_schema 2>>$LOG_FILE | grep -v performance_schema 2>>$LOG_FILE | sed -e 's/\r//' 2>>$LOG_FILE); do
-        log $DEBUG "$DBG   > \$DOCKER exec mysql /usr/bin/mariadb-dump --hex-blob --user=xxx --password=xxx --databases $db"
+#        log $DEBUG "$DBG   > \$DOCKER exec mysql /usr/bin/mariadb-dump --hex-blob --user=xxx --password=xxx --databases $db"
-        $DOCKER exec mysql /usr/bin/mariadb-dump --hex-blob $mysqlconnect --databases $db >$dump_dir/$db.sql 2>>$LOG_FILE
+#        $DOCKER exec mysql /usr/bin/mariadb-dump --hex-blob $mysqlconnect --databases $db >$dump_dir/$db.sql 2>>$LOG_FILE
-        is_error $? false && return 1
+#        is_error $? false && return 1
-    done
+#    done
-    return 0
+#    return 0
-}
+#}
 
 dump_postgresql() {
     local pg_container=$1
@@ -147,18 +152,31 @@ check_root() {
         exit 100
     fi
 }
+# Ausführung auf macOS begrenzen
+#
+check_mac() {
+    if [[ "$(uname)" != "Darwin" ]]; then
+        log $ERROR "$ERR script works only on MAC."
+        echo "****"
+        echo "***** script works only on MAC! *****"
+        echo "****"
+        exit 110
+    fi
+}
 
 start_containers() {
     local let rc=0 
     log $DEBUG "$DBG start_containers()"
-    if [ -f /var/docker/run/docker-compose.yml ]; then
+#    if [ -f /var/docker/run/docker-compose.yml ]; then
-      log $DEBUG "$DBG > \$DOCKER up -d"
+#      log $DEBUG "$DBG > \$DOCKER up -d"
-      $DOCKER up -d >>$LOG_FILE 2>&1
+#      $DOCKER up -d >>$LOG_FILE 2>&1
-      let rc=rc+$?
+#      let rc=rc+$?
-    fi
+#    fi
     if [ -d /var/containers ]; then
         do_start_stop_containers start
         let rc=rc+$?
+         # warten bis alle wieder da sind
+        sleep 2m
     fi
     return $rc
 }
@@ -166,11 +184,11 @@ start_containers() {
 stop_containers() {
     local let rc=0
     log $DEBUG "$DBG stop_containers()"
-    if [ -f /var/docker/run/docker-compose.yml ]; then
+#    if [ -f /var/docker/run/docker-compose.yml ]; then
-      log $DEBUG "$DBG > \$DOCKER down"
+#      log $DEBUG "$DBG > \$DOCKER down"
-      $DOCKER down >>$LOG_FILE 2>&1
+#      $DOCKER down >>$LOG_FILE 2>&1
-      let rc=rc+$?
+#      let rc=rc+$?
-    fi
+#    fi
     if [ -d /var/containers ]; then
         do_start_stop_containers stop
         let rc=rc+$?
@@ -195,6 +213,44 @@ do_start_stop_containers() {
     return $rc
 }
 
+# podman auto-update nach dem Backup starten
+#
+# Die fn schreibt sehr viel ins Log, damit der Update ggf. nachvollzogen werden kann,
+# wenn etwas daneben geht.
+#
+update_services() {
+    log $DEBUG "$DBG update_services()"
+    mail_log $INFO "$INF    update services"
+    local old_img=$($PODMAN ps --filter "label=io.containers.autoupdate=registry" --format "table {{.ImageID}} {{.Names}} {{.Image}}" --sort names)
+    echo "$old_img" >>$LOG_FILE 2>&1
+    local plan=$($CONTAINER_SVC_UPDATE_USER --dry-run --format "{{.Image}} {{.Updated}}" 2>&1 | grep pending | sed 's/^\(.*\) pending/\1/')
+    for i in $plan; do
+        mail_log $INFO "$INF      pending: $i"
+    done
+    local upd=$($CONTAINER_SVC_UPDATE_USER --format "table {{.Image}} {{.Updated}}" 2>&1 | tee -a $LOG_FILE | grep true | sed 's/^\(.*\) true/\1/')
+    check_pipe_rc ${PIPESTATUS[@]}
+    local rc=$?
+    for i in $upd; do
+        mail_log $INFO "$INF      updated: $i"
+    done
+    # warten bis alle wieder da sind (wg. ps)
+    sleep 2m >>$LOG_FILE 2>&1
+    local new_img=$($PODMAN ps --filter "label=io.containers.autoupdate=registry" --format "table {{.ImageID}} {{.Names}} {{.Image}}" --sort names)
+    echo "$new_img" >>$LOG_FILE 2>&1
+    # diff output bring zu wenig
+    #log $DEBUG "$DBG diff before after"
+    #local diff_img=$(diff <(echo "$old_img") <(echo "$new_img"))
+    #echo "$diff_img" >> $LOG_FILE
+    return $rc
+}
+
+check_services() {
+    log $DEBUG "$DBG check_services()"
+    mail_log $INFO "$INF    check services"
+    $HERE/check.sh >>$LOG_FILE 2>&1
+    return $?
+}
+
 # Zugriffsrechte für Logs und Backups setzen
 #
 fix_acls() {
@@ -389,7 +445,29 @@ backup_all_dirs() {
     for dir in $(iterate_dirs_in "$root" "$@"); do
         tar_file="$target/$prefix-$dir.$EXT"
 
-        backup_dir "$root" "$tar_file" "$dir"
+        backup_directory "$root" "$tar_file" "$dir"
+        if [ $? -ne 0 ]; then return 1; fi
+
+    done
+    return 0
+}
+
+# Einzelnes Verzeichnis sichern und Backup prüfen
+#
+# $1 - Pfad zum Verzeichnis, das gesichert werden soll
+# $2 - Zielpfad und -name für das Archiv
+# $2 - zu sicherndes Verzeichnis
+#
+# returns 0 for success, 1 otherwise
+#
+
+backup_directory() {
+    log $DEBUG "$DBG backup_directory( $@ )"
+    local root=$1
+    local tar_file=$2
+    local dir=$3
+        
+    tar_dir "$root" "$tar_file" "$dir"
     if [ $? -ne 0 ]; then return 1; fi
 
     create_list "$tar_file" "$dir"
@@ -397,25 +475,28 @@ backup_all_dirs() {
 
     test_integrity "$tar_file"
     if [ $? -ne 0 ]; then return 1; fi
-    done
+
-    return 0
 }
 
 # Einzelnes Verzeichnis sichern.
 #
-# $1 - Pfad um Verzeichnis, das gesichert werden soll
+# $1 - Pfad zum Verzeichnis, das gesichert werden soll
 # $2 - Zielpfad und -name für das Archiv
 # $2 - zu sicherndes Verzeichnis
 #
 # returns 0 for success, 1 otherwise
 #
-backup_dir() {
+tar_dir() {
-    log $DEBUG "$DBG backup_dir( $@ )"
+    log $DEBUG "$DBG tar_dir( $@ )"
     local root=$1
     local archive=$2
     local dir=$3
-    log $DEBUG "$DBG > tar -c -z --numeric-owner --one-file-system --exclude \"@eaDir\" -C \"$root\" \"$dir\" | gpg --batch -c --passphrase xxxx -o \"$archive\""
+    local sort=--sort=name
-    tar -c -z --numeric-owner --one-file-system --exclude "@eaDir" -C "$root" "$dir" 2>>$LOG_FILE  | gpg --batch -c --passphrase $PASSPHRASE -o "$archive" 2>>$LOG_FILE 
+    if [[ "$(uname)" == "Darwin" ]]; then
+        sort=""
+    fi
+    log $DEBUG "$DBG > tar -c -z --numeric-owner --one-file-system $sort --exclude \"@eaDir\" -C \"$root\" \"$dir\" | gpg --batch -c --passphrase xxxx -o \"$archive\""
+    tar -c -z --numeric-owner --one-file-system $sort --exclude "@eaDir" -C "$root" "$dir" 2>>$LOG_FILE  | gpg --batch -c --passphrase $PASSPHRASE -o "$archive" 2>>$LOG_FILE 
     check_pipe_rc ${PIPESTATUS[@]}
     return $?
 }
@@ -474,11 +555,11 @@ set_log_info() {
     mail_log $INFO ">>> "
 }
 
-backup_daily() {
+cron_backup_daily() {
     # "master"-Server startet Backup auf NAS
     if [ -d $BACKUP_MASTER_CHECK ]; then
         log $DEBUG "$DBG starting daily backup on $NAS_HOSTNAME"
-        run_script_remote $NAS_IP "$NAS_SCRIPT -d"
+        run_script_remote $NAS_IP "$NAS_SCRIPT --dx"
 
         # alte Logs löschen (nur auf einem Server ausführen)
         prune_logs
@@ -491,6 +572,10 @@ backup_daily() {
         nohup $THIS_SCRIPT -w >>$LOG_FILE 2>&1 </dev/null &
     fi
 
+    backup_daily
+}
+
+backup_daily() {
     mail_log $INFO ">>>>>>>>>> daily auto backup $VER for $HOST_NAME <<<<<<<<<<"
 
     do_auto_backup backup_daily
@@ -621,7 +706,7 @@ list_archives() {
     local target=$1
     local targ=${NAS_ROOT//\//\\\/} # slashes escapen
     log $DEBUG "$DBG > find \"$NAS_ROOT\" -type f -name \"*.$EXT\" | sed -E \"s/^$targ//\""
-    find "$NAS_ROOT" -type f -name "*.$EXT" 2>>$LOG_FILE | sed -E "s/^$targ//" 2>>$LOG_FILE
+    find "$NAS_ROOT" -type f -name "*.$EXT" 2>>$LOG_FILE | sed -E "s/^$targ//" 2>>$LOG_FILE | sort
     check_pipe_rc ${PIPESTATUS[@]}
     return $?
 }
@@ -713,8 +798,8 @@ mount_usb_device() {
     fi
 }
 
-# Check if auto mounted device is exfat and return mount point
+# Check if auto mounted device is exfat or vfat and return mount point
-# (fn for consitence with linux fn)
+# (fn for consistence with linux fn)
 #
 # $1 - device name
 # returns mount point
@@ -724,7 +809,7 @@ mount_usb_device_syno() {
     local device=$1
     log $DEBUG "$DBG > $SYNO_USB -info $device | grep -i \"file system\" | sed -E \"s/.*:\s*(.*)\s*/\1/\""
     local fs=$($SYNO_USB -info $device 2>>$LOG_FILE | grep -i "file system" 2>>$LOG_FILE | sed -E "s/.*:\s*(.*)\s*/\1/" 2>>$LOG_FILE)
-    if [ "$fs" != "exfat" ]; then
+    if [ "$fs" != "exfat" && "$fs" != "vfat" ]; then
         mail_log $ERROR "$ERR device $device not exfat formatted."
         return 1
     fi
@@ -735,6 +820,7 @@ mount_usb_device_syno() {
         mail_log $ERROR "$ERR mount point \"$mount_point\" does not exist."
         return 1
     fi
+    mount_point=$(check_syno_mount_point $mount_point)
     echo $mount_point
     return 0
 }
@@ -799,6 +885,28 @@ umount_usb_device_linux() {
     return $?
 }
 
+# Mit GUID-Partitontable meldet Synology die falsche Partition (/volumeUSB1/usbshare1-1)
+# zusätzlich auf ggf. vorhandener 2. Partition (*1-2) suchen
+#
+# $1 - mount point
+#
+check_syno_mount_point() {
+    log $DEBUG "$DBG check_syno_mount_point( $@ )"
+    local mount_point=$1
+
+    log $DEBUG "$DBG > ls $mount_point/${tagP1}*${tagP2} | wc -l"
+    if [ "$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | wc -l 2>>$LOG_FILE)" != "1" ]; then
+        
+        log $DEBUG "No tag at mount point \"$mount_point\". Checking next partiton."
+        mount_point=$(echo $mount_point | sed -E "s/(.*1)-1/\1-2/")
+        if [ "$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | wc -l 2>>$LOG_FILE)" != "1" ]; then
+            mail_log $ERROR "$ERR no tag found on device at $mount_point."
+            return 1
+        fi
+    fi
+    echo $mount_point
+}   
+
 # USB-HDD suchen und Backup-Typ ermitteln
 #
 # Der Typ wird über eine Datei auf der USB-HDD festgelegt:
@@ -809,19 +917,11 @@ umount_usb_device_linux() {
 check_backup_device() {
     log $DEBUG "$DBG check_backup_drive( $@ )"
     local mount_point=$1
-    local tagP1=".backup#"
-    local tagP2=".tag"
-
-    log $DEBUG "$DBG > ls $mount_point/${tagP1}*${tagP2} | wc -l"
-    if [ "$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | wc -l 2>>$LOG_FILE)" != "1" ]; then
-        mail_log $ERROR "$ERR no tag found on device at $mount_point."
-        return 1
-    fi
 
     log $DEBUG "$DBG > ls $mount_point/${tagP1}*${tagP2} | sed -E \"s/.*$tagP1(.*)$tagP2/\1/\""
     local tag=$(ls $mount_point/${tagP1}*${tagP2} 2>>$LOG_FILE | sed -E "s/.*$tagP1(.*)$tagP2/\1/" 2>>$LOG_FILE)
     if [ $? -ne 0 ]; then
-        mail_log $ERROR "$ERR no tag found on device at $mount_point."
+        mail_log $ERROR "$ERR no valid tag found on device at $mount_point."
         return 1
     fi
     echo $tag

main.sh

@@ -3,14 +3,28 @@
 # entrypoint for all actions
 #
 
-# 2.111   05.05.2025 - Fix DB-Dump
+# 2.3.1.  16.08.2025 - 30 min delay for mail.sh
+# 2.3.0   12.08.2025 - new function for backup & encryption of Proton exports
+# 2.2.4   30.07.2025 - inc delay (again) for container startup-check (2m)
+# 2.2.3   24.06.2025 - Export-Disk kann exfat- oder vfat-formatiert sein, 
+#                      Export-Disk mit mehreren Partitonen erkennen
+# 2.2.2   19.06.2025 - inc delay for container startup check, fix error in log output
+# 2.2.1   16.06.2025 - delay container startup check
+# 2.2.0   16.05.2025 - fixes for auto-update, podman migration done
+# 2.1.17  11.05.2025 - bugfixes, sort tar archive, split daily/cron daily
+# 2.1.16  10.05.2025 - fix mail.sh, log results of auto-update
+# 2.1.15  09.05.2025 - podman auto-update
+# 2.1.14  09.05.2025 - Fix mail.sh, homeserver.target, cleared all docker references
+# 2.1.13  08.05.2025 - check if services are running after backup
+# 2.1.12  08.05.2025 - mail.sh an neuen Container angepasst
+# 2.1.11  05.05.2025 - Fix DB-Dump
 # 2.1.10  05.05.2025 - Postgres-Dump auf podman umgestellt
 # 2.1.9   02.05.2025 - DB-Dump erweitert, damit Dumps für mehrere postgres möglich sind
 # 2.1.8   30.04.2025 - systemctl start/stop eingebaut
 # 2.1.7   29.04.2025 - 1. Schritt zur Umstellung auf podman
 # 2.1.6   29.04.2025 - weekly backup Sa->SO
 
-VER="2.1.10"
+VER="2.3.1"
 
 HERE=$(dirname "$0")
 THIS_SCRIPT=$0
@@ -26,6 +40,7 @@ show_help() {
     echo "                       show contents of archive (path from $NAS_ROOT)"
     echo '       -r, --restore <archive> <file(s)> ' 
     echo "                       restore files from archive to $RESTORE_PATH"
+    echo "       -p, --proton    backup and encrypt Proton exports (MacBook only)"
     echo "       -h, -?. --help  show this help"
     echo " "
     echo " -d, -w, -e must be run as superuser."
@@ -64,6 +79,12 @@ while :; do
             show_help    # Display a usage synopsis.
             exit 0
             ;;
+        --dx) 
+            MAIL_LOG_FILE="${log_file_name}.auto.log"
+            check_root
+            cron_backup_daily 
+            break 
+            ;;
         -d|--daily) 
             MAIL_LOG_FILE="${log_file_name}.auto.log"
             check_root
@@ -115,6 +136,12 @@ while :; do
             do_restore $@
             break
             ;;
+        -p|--proton)
+            MAIL_LOG_FILE="${log_file_name}.proton.log"
+            check_mac
+            proton_backup
+            break
+            ;;
         --)              # End of all options.
             shift
             break

nathan.sh

@@ -1,24 +1,25 @@
 #!/usr/bin/env bash
 
-USER_CONTAINERS="homeassistant-pod codeserver jellyfin pgadmin nextcloud-pod calibre nexus git-pod caddy.socket caddy"
+USER_CONTAINERS="homeserver.target"
 ROOT_CONTAINERS=
 
-DOCKER_ROOT=/var/docker
+#DOCKER_ROOT=/var/docker
-BACKUP_TARGET=$DOCKER_ROOT/tmp
+CONTAINERS_ROOT=/var/containers
+BACKUP_TARGET=$CONTAINERS_ROOT/tmp
 NAS_TARGET="$NAS_ROOT/daily/$HOST_NAME/backup.$DAY"
 
 backup_daily1() {
     BACKUP_SOURCE="/var"
-    BACKUP_EXCLUDE_DIRS=(docker)
+    BACKUP_EXCLUDE_DIRS=(containers)
 }
 
 backup_daily2() {
-    BACKUP_SOURCE="/var/docker"
+    BACKUP_SOURCE="/var/containers"
     BACKUP_EXCLUDE_DIRS=(vol tmp)
 }
 
 backup_daily3() {
-    BACKUP_SOURCE="/var/docker/vol"
+    BACKUP_SOURCE="/var/containers/vol"
     BACKUP_EXCLUDE_DIRS=()
 }
 
@@ -27,9 +28,9 @@ before_backup() {
     let local rc=0
     #dump_mariadb $DOCKER_ROOT/dump/mysql
     #let rc=rc+$?
-    dump_postgresql ncd_pg $DOCKER_ROOT/dump/nextcloud
+    dump_postgresql ncd_pg $CONTAINERS_ROOT/dump/nextcloud
     let rc=rc+$?
-    dump_postgresql gitea_pg $DOCKER_ROOT/dump/gitea
+    dump_postgresql gitea_pg $CONTAINERS_ROOT/dump/gitea
     let rc=rc+$?
     if [ $rc -gt 0 ]; then
         return 1
@@ -44,5 +45,9 @@ after_backup() {
     let rc=rc+$?
     copy_to_nas "$BACKUP_TARGET" "$NAS_TARGET"
     let rc=rc+$?
+    update_services
+    let rc=rc+$?
+    check_services
+    let rc=rc+$?
     return $rc
 }